Manifolds / Changeover Regulators
TESCOM™ manifolds are designed to minimize space & potential leak paths and changeover regulators provide continuous gas and fluid pressure management.
 | TESCOM Acetylene Panel is a central gas supply unit for the pressure control of Acetylene. Depending on the requirements, these units switch over to a spare cylinder to enable an uninterrupted gas supply. |
|
|
|
 | TESCOM ACS012 Series is a compact, lightweight high purity changeover system for specialty, corrosive, and pyrophoric gases. |
|
|
|
 | TESCOM ACS3200 Series is a compact, lightweight high purity, high flow changeover system for specialty, corrosive, and pyrophoric gases. Diffusion-resistant metal diaphragm seal ensures gas purity and integrity. |
|
|
|
 | TESCOM Compact Panel is a central gas supply unit for the pressure control of analytical gases in laboratory facilities. |
|
|
|
 | TESCOM Compact Panel VCR® is a central gas supply unit for the pressure control of high grade analytical gases in laboratory facilities. |
|
|
|
 | TESCOM CR441800 Series is a compact high pressure changeover system for general purpose and industrial gases. Provides continuous low gas flow from two pressure sources. |
|
|
|
 | TESCOM CS-2200 Series is a complete high purity changeover system which includes a line regulator for specialty, corrosive, and pyrophoric gases. Diffusion-resistant metal diaphragm seal ensures gas purity and integrity. |
|
|
|
 | TESCOM Electrical Heating Compact Panel is a heating unit designed to avoid the freezing of the Compact Panel when gases with a high Joule-Thomson coefficient expand. |
|
|
|
 | TESCOM Labo and Doppelregulus are cylinder pressure regulators for applications with medium flow requirements (Labo) or low outlet pressures (Doppelregulus). |
|
|
|
 | TESCOM Propane Panel is a central gas supply unit for corrosive and non-corrosive gases and gas mixtures up to gas purity 6.0; design is according to DVGW with safety blow off valve (SBV). |
|
|
|
 | TESCOM Wega 1 single-stage and Wega 2 dual-stage cylinder pressure regulators are designed for gas purities up to 6.0 and offer relief valve integrated into body for low internal gas volume. |
|
|
|
 | TESCOM Wega 1CG-P cylinder pressure regulators are based on the reliable 44-2200 and 44-2800 Series and provide captured bonnet for use with corrosive gases and gas mixtures. |
|
|
|
 | TESCOM Wega Mini cylinder pressure regulator is designed for gas purities up to 6.0 and offers a lightweight and compact integrated relief valve design. |
|
|
|