• Fully compatible with modern Ethernet networks and DCS communication
• Diaphragm-based chromatograph valves available in 6-port and 10-port versions
• Thermal conductivity detector (TCD) sensitive down to very low parts-per-million levels
• Flame ionization detector (FID) sensitive to parts-per-billion levels
• Storage of up to 2,500 chromatographs, including sample calibration and validation streams
• Archives up to 64 item averages and up to 35 days of standard runs and calculation

• Standard 24 VDC power
• Integrated controller electronics
• Pipe-mount, wall-mount, or floor-mount

• Designed for field-mounting without the need for expensive shelters and without sacrificing analytical power
• Low carrier and power consumption
• Longest gas chromatograph valve and column warranties available

• High repeatability - + 0.0125 of heating value (+0.125 BTU/1000 BTU) for controlled-environment C6+ analysis and +0.025 of heating value (+0.25 BTU/1000 BTU) for uncontrolled-environment (-20^o to 60^o C/ -4^o  to 140^o F) C6+ analysis
• Wide dynamic range from percent to trace-level components
• Reliable performace over broad ambient temperatures -40^o to 60^o C/ -40^o  to 140^o F

• MON 20/20^TM software setup and diagnostics
• A redesigned architecture with fewer cables and easy accessibility to internal parts

•   Standard: 24 VDC (20-30 VDC)

•   Optional: 90-264 VAC, 47-63 Hz

Environmental temperature:
-20° to 60° C (-4° to 140° F)

Environmental temperature without safety certification:
-40° to 60° C (-40° to 140° F)

Enclosure Protection Rating: IP66 and NEMA 4X

Dimensions (without sample system):

•   Wall-mount:
711.20 mm H x 444.5 mm W x 497.84 mm D
(28” H x 17.5” W x 19.6” D)

•   Pipe-mount:
711.20 mm H x 444.5 mm W x 670.56 mm D
(28” H x 17.5” W x 26.4” D)

•   Floor-mount:
1531.62 mm H x 444.5 mm W x 612.14 mm D (60.3” H x 17.5” W x 24.1” D)

Mounting: Free-standing (standard), wall- or pipe-mount (optional)

Approximate Weight (without sample system): 49.895 kg (110 lbs.)

Area Safety Certification Options:*

•   CSA:
–   USA
•  Class I, Zone 1, A Ex d IIC, T6
•  Class I, Division 1, Groups B, C, D, T6,  Enclosure Type 4
–  Canada
• Class I, Zone 1, Ex d IIC, T6
• Class I, Zone 1, Ex d IIC, T6

•   ATEX/IECEX
–   Ex II 2G
–   Ex d IIC Gb T6

Oven: Airless heat sink, maximum 150° C (302° F)

Valves: 6-port and 10-port diaphragm chromatograph valves. Other  types of valves, such as liquid injection or rotary valves, may be used depending on the application

Carrier Gas: Application-dependent. Typically zero-grade helium, nitrogen, or hydrogen

Sample Input Pressure Range (recommended): 15-20 psig

Carrier Gas Input Pressure Range (recommended): 90-100 psig

Detector: Thermal conductivity detector (TCD), flame ionization detector (FID), TCD/TCD or TCD/FID dual detector configurations possible; flame photometric detector (FPD) available (see FPD module data sheet)

Gating Options: Fixed-time, slope sensing gating of peaks

Streams: Up to 20 streams (including calibration stream), 6 streams standard

Chromatograms stored/archived internally: Stores up to 30 days of analysis report data and up to 2500 individual chromatograms.

Communications (Standard):
Ethernet:  Two available connections – one RJ-45 port & one 4-wire termination – with 10/100mbps
Analog inputs: Two standard inputs filtered with transient protection, 4-20mA (user scalable and assignable)
Analog outputs: Six isolated outputs, 4-20mA
Digital inputs: Five inputs, user assignable, optically isolated, rated to 30VDC @ 0.5A
Digital outputs: Five user-assignable outputs, Form C and electromechanically isolated, 24VDC
Serial: Three termination blocks, configurable as RS-232, RS-422 or RS-485 and one D-sub (9-pin) port for PC connection

Communications (Options):
Two expansion slots available for additional communications.  Each slot has the capacity to add one of the following:
4 analog inputs (isolated) card
4 analog outputs (isolated) card
8 digital inputs (isolated) card
5 digital outputs (isolated) card
1 RS-232, RS-422 or RS-485 serial connection card
1 modem card, 300-19.2k baud

Memory Capacity: 1 Gb of flash memory for data storage; 128Mb of SDRAM system memory with 2 Mb static RAM (battery-backed)

*Use of the optional LSIV will result in slightly different certifications.