Mobrey Point Level Detection Products
A range of standard ultrasonic liquid level switches (gap sensors) combined with the Mobrey MCU200 Series industrial control units (MCU201/MCU203), for use in a variety of liquid applications including industrial level detection and interface duty.
 | The Mobrey 003 ultrasonic gap sensor liquid level switch is designed for high or low level alarm duties to give a voltage free contact or solid state transistor output for alarm signalling or as part of a pump control system |
 | Mobrey horizontal liquid level switches are known by process industries for reliability, quality and longevity. Offering high and low alarm, dirty liquid switching and pump control duties, the float switch is ideal for many industrial liquid applications |
 | The Mobrey Mini Squing vibrating fork liquid level switch is small, light, robust and easy to install. It comes with an on-board microprocessor, self-monitoring and fail-safe functions and it costs significantly less than previous switches of this kind |
 | Comprising a small float on the wet side and a body containing a high current micro-switch on the dry side, the Mobrey M-Switch reliably detects liquid level to give a voltage free contact operation for alarm signalling or as part of a pump control system |
 | The Mobrey CLS RF (radio frequency) capacitance dry products level switch is a microprocessor based, self-calibrating level control with no moving parts, operating using the RF Capacitance principle. Used for high or low level alarm in silos and hoppers |
 | The Mobrey PLS paddle switch may be used as either a high or low level limit switch for dry and solids products, and is easily mounted through the wall of the vessel |
 | The Mobrey VLS vibrating rod dry products level switch is the solution for single point level switching in free flowing solids and dry products across a wide density range, from fine powders to grains. It is self-cleaning. |
 | The Mobrey Squing 2 is a liquid point level switch designed using the tuning fork principle. It can be used as high or low level alarm and for overfill protection |
 | The Mobrey Squitch 2 is an ultrasonic gap sensor designed for switching in clean liquids. A 316 stainless steel wetside allows use in a wide range of liquids, offering more than just simple liquid level detection |
 | A range of standard ultrasonic liquid level switches (gap sensors) combined with the Mobrey MCU200 Series industrial control units (MCU201/MCU203), for use in a variety of liquid applications including industrial level detection and interface duty |
 | The Mobrey vertical float level switch carries a stainless steel sheathed permanent magnet which rises and falls in the glandless pressure tube with changing liquid level |
|
|
|
