Fisher J31 Series rotary gauges can be used on stationary or mobile tanks to visually indicate the amount of LP-Gas or Anhydrous ammonia (NH3) in the container.

Fisher M3162 Series clamp style hose couplings are designed to provide ACME or NPT end connections on 1/2-inch to 3-inch inside diameter LP-Gas and anhydrous ammonia hose.

Fisher Type M570 is a 1-3/4-inch male ACME by 1-3/4-inch female ACME adaptor with a built-in back check valve for use with the Fisher Type N480 hose end valve or hose end valves made by other manufacturers.

Fisher pneumatic actuators attach directly to the valve to permit opening and closing. The actuators can be tied into the air brake of the transport or bobtail or can be used to remotely operate stationary storage tanks at bulk plants.

Fisher Type P163A or P164A auxiliary remote release units allow the internal valve to be closed from a location other than the primary control point (Type P650 or P651).

Fisher P313 and P340 Series latch and remote release mechanisms can be latched in the open position. The lever can be released from a remote location.

Fisher Type P539A pneumatic actuators permit opening and closing N550 Series Snappy Joe emergency shutoff valves (ESVs) from a remote location.

Fisher Type P551 is designed to aid the closure of the Type N550 ESV. Type P551A is designed to aid the closure of the Type N550 equipped with a Type P327A remote pneumatic release air cylinder.

Fisher Type P650 is the primary cable control for remote operation of all 1-1/4-inch, 2-inch, and 3-inch size Fisher internal valves.