Pneumatic Actuator Accessories
The basic actuator may be used to open and close the valve, but if more functionality is required then the actuator can be extended by the addition of accessories. These can be used to make the actuator operate faster or slower or to provide position indication or position control to the controller. These are just a small sample of the additional possibilities by El-O-Matic.
 | This should be used on applications where on site servicing of the actuator is required and where the actuator needs to be isolated from the control system. |
 | The breather block is used on single acting actuators and provides corrosion protection of the actuator spring chamber. |
 | This switch box is suitable for utility applications or process applications under conditions that are less demanding. Functionality is similar to that of the HDN but with a lower level of waterproofing (IP 65) and limited explosion proof versions. |
 | The El-O-Matic MO Series declutchable gear operators offer a simple and reliable method of local manual operation. |
 | The Posiflex range consists of 2 models, the pneumatic F10 and the electro-pneumatic F20. All models are used in applications in which the pneumatic actuators must be positioned with a high degree of accuracy. |
 | Solenoid valves provide local open/close control by means of a remote powered electric signal. El-O-Matic supplies industry standard NAMUR solenoid valves for direct mounting on the air connection face of the actuator. |
 | This is used in combination with a NAMUR solenoid valve and serves to provide independent speed control of both the opening and closing strokes. |
|
|
|
