PlantWeb® (800-338-8158 or 641-754-3771)
Note: Additional classes may have been, or can be scheduled if these dates do not meet your requirements. Please check with the registrar for possible dates not shown on this page. Contact the registration office at education@emersonprocess.com or call 800/338-8158 or 641/754-3771 to verify class availability and confirm enrollment before making any travel arrangements.
All prices are in U.S. dollars. Additional tax charges may apply. Please contact Spartan Controls directly for Canadian pricing information.
Notice for 2012 Attendance -
If you will be attending a course session in Austin in 2012, be advised that Educational Services will conduct courses in our brand new facility located at 1100 W. Louis Henna Blvd., Round Rock, TX (just North of Austin) beginning March 26th.
7101 PlantWeb/DeltaV Introduction $2,000
Austin, TX: 4/3, 11/6
Enrollment Request
7009 DeltaV Implementation I $2,875
Austin, TX: 1/16, 1/23, 2/6, 2/20, 2/27, 3/5, 4/2, 3/26, 4/23, 5/7, 5/21, 6/4, 6/18, 7/9, 7/23, 8/6, 8/20, 9/10, 9/24, 10/8, 10/22, 11/5, 11/26, 12/10
Edmonton, AB: 1/16, 2/13, 3/19, 4/16, 5/14, 6/18, 7/23, 8/27, 9/24, 10/22, 11/19, 12/10
Calgary, AB: 6/25
Saskatoon, SK: 6/4
Burnaby, BC: 10/15
Virtual Classroom: 1/30, 4/9, 6/4, 11/26
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
AMS Suite: Intelligent Device Manager (800-338-8158 or 641-754-3771)
Note: * Courses at these locations are an additional $150
Note: Additional classes may have been, or can be scheduled if these dates do not meet your requirements. Please check with the registrar for possible dates not shown on this page.
7020 AMS Device Manager $1,950
Austin, TX: 2/21, 6/12, 9/18
Marshalltown, IA: 4/17
Eden Prairie, MN: 5/15, 7/10, 8/21, 12/11
Las Vegas, NV*: 3/20, 10/16
Ontario, CA*: 7/24
Edmonton, AB: 4/17, 8/21, 10/9
Fort McMurray, AB: 7/31
Burnaby, BC*:12/4
*Additional $150
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
7021 AMS Device Manager with Rosemount HART Instruments $1,600
Eden Prairie, MN: 4/24
Enrollment Request
7022 Fisher Smart Instrumentation with AMS Device Manager $2,000
Marshalltown, IA: Call to Schedule
Edmonton, AB: 6/19, 9/25 (Refer to Spartan link below for pricing)
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
7038 AMS Device Manager with FOUNDATION™fieldbus Fieldvuew $2,700
Austin, TX: 5/21, 10/22
Enrollment Request
FOUNDATION™ fieldbus (800-338-8158 or 641-754-3771)
Note: Additional classes may have been, or can be scheduled if these dates do not meet your requirements. Please check with the registrar for possible dates not shown on this page. Contact the registration office at education@emersonprocess.com or call 800/338-8158 or 641/754-3771 to verify class availability and confirm enrollment before making any travel arrangements.
Notice for 2012 Attendance -
If you will be attending a course session in Austin in 2012, be advised that Educational Services will conduct courses in our brand new facility located at 1100 W. Louis Henna Blvd., Round Rock, TX (just North of Austin) beginning March 26th. We will post updated hotel choices that are close to the training center in the very near future
2370 Fieldbus Measurement Instruments $2,000
Eden Prairie, MN: 4/18, 12/5
Enrollment Request
7030 Fieldbus Devices $2,800
Austin, TX: 6/25
Enrollment Request
7032 Fieldbus Systems and Devices $2,800
Austin, TX: 4/23, 10/8
Edmonton, AB: 3/5, 6/11, 9/24, 11/19
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
7035 Practical Implementation of FOUNDATION™ fieldbus $1,450
Call to Schedule: 800-338-8158 or 641-754-3771
Enrollment Request
7036 Fieldbus Digital Valve Controllers $2,000
Marshalltown, IA: 4/10, 7/31, 10/2
Enrollment Request
7037 Communication Bus Interfaces with the DeltaV System $2,000
Austin, TX: 10/15
Edmonton, AB: 2/27, 10/9
(Refer to Spartan link below for pricing)
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
Process Control (800-338-8158 or 641-754-3771)
Note: Additional classes may have been, or can be scheduled if these dates do not meet your requirements. Please check with the registrar for possible dates not shown on this page. Contact the registration office at education@emersonprocess.com or call 800/338-8158 or 641/754-3771 to verify class availability and confirm enrollment before making any travel arrangements.
Notice for 2012 Attendance -
If you will be attending a course session in Austin in 2012, be advised that Educational Services will conduct courses in our brand new facility located at 1100 W. Louis Henna Blvd., Round Rock, TX (just North of Austin) beginning March 26th. We will post updated hotel choices that are close to the training center in the very near future
1430 EnTech - Toolkit Training $2,000
Call to Discuss: 800-338-8158 or 641-754-3771
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
8106 Boiler & Powerhouse Applications & Problem Solving $2,000
Call to Discuss: 800-338-8158 or 641-754-3771
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
8107 EnTech - Paper Machine Applications & Problem Solving $2,300
Call to Discuss: 800-338-8158 or 641-754-3771
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
9000 Introduction to Process Control $2,050
Marshalltown, IA: 2/13, 4/23, 7/9
Enrollment Request
9006 Loop Tuning Short Course $1,150
Call to Discuss: 800-338-8158 or 641-754-3771
Enrollment Request
9025 Control Loop Foundation $2,400
Austin, TX: 5/14, 11/5
Enrollment Request
9030 Process Dynamics and Tuning Fundamentals (PCE I) $2,300
Toronto, ON: 4/16, 11/26
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
9031 Process Analysis and Minimizing Variability (PCE II) $2,300
Toronto, ON: 4/23, 12/3
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
9032 Applied Modern Loop Tuning $2,000
Toronto, ON: 2/7, 5/8, 9/11
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
9034 Applied Advanced Regulatory Controls $2,000
Toronto, ON: 5/15
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
9035 EnTech Applied Modern Loop Tuning and Advanced Regulatory Controls $2,500
Toronto, ON: 6/4
Note: An additional GST of approximately 5% will be added to the tuition fee for classes held in Canada.
Enrollment Request
Refining Process Training (412-826-5440)
All programs are scheduled for presentation at the Crown Plaza Hoston North Greenspoint in Houston, TX.
RPS100 Basics of Petroleum Refining for Non-Technical Personnel $ 750
Houston, TX: 2/21, 5/8, 10/16
Enrollment Request
RPS110 Introduction to Petroleum Refining Processing $1,850
Houston, TX: 2/22, 5/9, 10/17
Enrollment Request
RPS120 Amine Treating & Sulfur Recovery Technologies $1,850
Houston, TX: 5/9, 10/31
Enrollment Request
RPS200 Fluid Catalytic Cracking Process Technology $1,850
Houston, TX: 2/28, 5/14, 10/22
Enrollment Request
RPS300 Hydrotreating and Hydrocracking Process Technology $1,850
Houston, TX: 2/29, 10/16
Enrollment Request
RPS400 Catalytic Reforming Process Technology $1,850
Houston, TX: 2/22
Enrollment Request
RPS500 Crude Oil Distillation $1,850
Houston, TX: 2/29, 10/24
Enrollment Request
RPS600 Delayed Coking Process Technology $1,850
Houston, TX: 2/22, 10/17
Enrollment Request
RPS800 Gasoline/Diesel Blending $2,050
Houston, TX: 2/21, 10/17
Enrollment Request
Machinery Health™ Management (800-675-4726 or 865-675-2400)
Note: Additional classes may have been, or can be scheduled if these dates do not meet your requirements. Please check with the registrar for possible dates not shown on this page.
Notice for 2012 Attendance -
If you will be attending a course session in Austin in 2012, be advised that Educational Services will conduct courses in our brand new facility located at 1100 W. Louis Henna Blvd., Round Rock, TX (just North of Austin) beginning March 26th.
2015 Balance Theory and Application $2,000
Knoxville, TN: 2/20, 6/4, 8/20, 10/22
Enrollment Request
2018 Infrared Analysis Software for AMS Machinery $1,600
Knoxville, TN: 3/5, 9/17
Enrollment Request
2019 IR Thermography Level I Certification $2,000
Knoxville, TN: 2/27, 9/10
Enrollment Request
2021EX ISO Compliant Category I Vibration Analyst $250
Knoxville, TN: 1/27, 2/24, 3/30, 5/4, 6/22, 8/10, 9/28, 10/26, 11/16, 12/21
San Diego, CA: 4/13, 8/17
Austin, TX: 4/27, 8/31
Enrollment Request
2022EX ISO Compliant Category II Vibration Analyst $250
Knoxville, TN: 1/27, 3/9, 4/20, 5/25, 7/20, 8/31, 10/12, 11/9, 12/21
San Diego, CA: 5/4, 10/19
Austin, TX: 10/12
Enrollment Request
2023EX ISO Compliant Category III Vibration Analyst $350
Knoxville, TN: 2/3, 3/23, 7/27, 11/16
San Diego, CA: 9/21
Austin, TX: 11/2
Enrollment Request
2031 Basic Vibration Analysis $2,000
Knoxville, TN: 1/23, 2/20, 3/26, 4/30, 6/18, 8/6, 9/24, 10/22, 11/12, 12/17
San Diego, CA: 4/9, 8/13
Austin, TX: 4/23
Enrollment Request
2032 Intermediate Vibration Analysis $2,000
Knoxville, TN 1/23, 3/5, 4/16, 5/21, 7/16, 8/27, 10/8, 11/5, 12/17
San Diego, CA: 4/30, 10/15
Austin, TX: 10/8
Edmonton, AB: 2/6
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information
Enrollment Request
2033 Advanced Vibration Analysis $2,000
Knoxville, TN: 1/30, 3/19, 7/23, 11/12
San Diego, CA: 9/17
Austin, TX: 10/29
Enrollment Request
2035/2075 Mystery PeakVue Technology and Autocorrelation $1,600
Knoxville, TN: 2/21, 6/12, 10/16
San Diego, CA: 10/2
Edmonton, AB: 5/22
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information
Enrollment Request
2039 Introduction to Windows-Based ODS/Modal $2,000
Knoxville, TN: 11/27
Enrollment Request
2053 Root Cause Failure Analysis $1,600
Knoxville, TN: 7/10
Enrollment Request
2067 Basic Ultrasonic Theory and Techniqes - Level 1 $1,600
Knoxville, TN: 6/26
Enrollment Request
2068 Introduction to AMS® Suite: Machinery Health Manager $2,000
Knoxville, TN: 1/16, 2/13, 3/19, 4/23, 6/11, 7/30, 9/17, 10/15, 12/10
San Diego, CA: 3/26, 9/10
Austin, TX: 4/16
Enrollment Request
2069 Fundamentals of Vibration $1,150
Knoxville, TN: 1/9, 2/6, 3/12, 4/16, 5/7, 6/4, 7/23, 8/13, 9/10, 10/8, 12/3
Austin, TX: 8/13
San Diego, CA: 3/19, 11/12
Enrollment Request
2070 Advanced AMS® Suite: Machinery Health Manager $2,000
Knoxville, TN: 3/12, 7/16, 11/5
Enrollment Request
2072 Fundamentals of CSI 2130 Machinery Health Analyzer $1,150
Knoxville, TN 1/11, 2/8, 3/14, 4/18, 5/9, 6/6, 7/25, 8/15, 9/12, 10/10, 12/5
San Diego, CA: 3/21, 11/14
Austin, TX: 8/15
Edmonton, AB: 11/5
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
2074 Intermediate AMS® Suite: Machinery Health Manager $2,000
Knoxville, TN: 1/16, 2/27, 4/9, 5/14, 7/9, 8/20, 10/1, 12/10
San Diego, CA: 5/7
Austin, TX: 10/1
Edmonton, AB: 9/10
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
2080 On-Line Protection (CSI 6000/6500) Operation and Maintenance $1,150
Knoxville, TN: 2/13, 5/14, 8/1
Enrollment Request
2081 ElectricMotor Diagnostics and MotorView® $2,000
Knoxville, TN: 7/16
Enrollment Request
2082A Level I Lubrication with Certification $ 900 *$1,600 for 2082A & 2082B
Knoxville, TN: 1/23, 5/14, 9/17
San Diego, CA: 10/22
Enrollment Request
2082B Level II Lubrication with Certification $ 900 *$1,600 for 2082A & 2082B
Knoxville, TN: 1/24, 5/15, 9/18
San Diego, CA: 10/23
Enrollment Request
2083 Oilview® for AMS Machinery Manager $2,000
Knoxville, TN: 1/30, 5/21, 9/24
Enrollment Request
2084 Wear Debris Analysis $1,150
Knoxville, TN 1/26, 5/17, 9/20
San Diego, CA: 10/25
Enrollment Request
2088 On-Line Prediction (CSI 4500/6500/XP32) Operation and Maintenance $2,000
Knoxville, TN: 2/6, 5/7, 8/6, 11/12
Edmonton, AB: 3/19
Enrollment Request
2089 Turbo Machinery Disgnosis with the CSI 4500 On-Line Systems $2,200
Knoxville, TN: 11/5
Enrollment Request
2091 Advanced CSI 2130 with PeakVue $1,600
Knoxville, TN: 2/7, 6/26, 9/5, 11/28
Edmonton, AB: 11/7
Pricing is in USDL. Please contact Spartan Controls directly for Canadian pricing information.
Enrollment Request
2092 Laser Alignment for CSI 2130 $1,400
Knoxville, TN: 2/28, 6/12, 10/30
Enrollment Request
e2130 Fundamentals- CSI 2130 Machinery Health Analyzer
eSTORE
e2074 Vibration Analysis Module AMS Machinery Manager (V5.2 or V5.3)
eSTORE
e2130 Oilview® for AMS Machinery Manager NEW
eSTORE
