Fieldbus 
Fieldbus Third Party Products 

The placement of a Third Party Product on this page is indicative only that the Third Party Product has been tested for interoperability with the DeltaV system utilizing a DeltaV H1 card (Series 2, Series M, or Series S). EMERSON PROCESS MANAGEMENT PROVIDES NO WARRANTY OF DESIGN, MATERIAL, WORKMANSHIP, PERFORMANCE, FITNESS, MERCHANTABILITY OR OTHERWISE IN CONNECTION WITH THIRD PARTY PRODUCTS. Warranties for Third Party Products may be obtained only from the applicable manufacturer.

Updated: October 31, 2011


Fieldbus Cable

Fieldbus Type A Cable     Belden 3076F or Equivalent

Fieldbus Power Supplies

MTL-Relcom
Safe Area, Class I Division 2 and Zone 2:
  FPS-I Redundant Fieldbus Power Supply With Terminator >>Additional Info: Relcom Application
  FPS-2 Redundant Fieldbus Power Supply (Without Terminator)
  FPS-DT Dual (2 Segment) Fieldbus Power Supply With Terminator
  FPS-D Dual (2 Segment) Fieldbus Power Supply (Without Terminator)
  8 Segment Redundant Power Supply (includes 2 F801 Power Modules (350 mA) with Carrier)
    F890-P* 8 Segment Redundant Fieldbus Power Supply - Vertical DIN Rail
    F892-P* 8 Segment Redundant Fieldbus Power Supply - Horizontal DIN Rail
  8 Segment Simplex Power Supply (includes 1 F801 Power Module (350 mA) and 1 F800-BLK Blanking Module with Carrier)
    F890-P*NR 8 Segment Simplex Fieldbus Power Supply - Vertical DIN Rail
    F892-P*NR 8 Segment Simplex Fieldbus Power Supply - Horizontal DIN Rail
  8 Segment Redundant Power Supply (includes 2 F802 Power Modules (500 mA) with Carrier)
    F890-2-P* 8 Segment Redundant Fieldbus Power Supply - Vertical DIN Rail
    F892-2-P* 8 Segment Redundant Fieldbus Power Supply - Horizontal DIN Rail
  8 Segment Simplex Power Supply (includes 1 F802 Power Module (500 mA) and 1 F800-BLK Blanking Module with Carrier)
    F890-2-P*NR 8 Segment Simplex Fieldbus Power Supply - Vertical DIN Rail
    F892-2-P*NR 8 Segment Simplex Fieldbus Power Supply - Horizontal DIN Rail


Pepperl+Fuchs
Redundant Fieldbus Power Hub Motherboards >>Additional Info: P+F Application
  MB-FB-4R* 4 Segment
  MB-FB-2R* 2 Segment
  MB-FB-1R* 1 Segment
Simplex Fieldbus Power Hub Motherboards
  MB-FB-4* 4 Segment
Power Hub Modules
  HD2-FBPS.1.500 Power Supply, 28-30 Volt
  HD2-FBPS.1.23.500 Power Supply, 21-23 Volt
  HD2-FBPS.1.17.500 Power Supply, 15-17 Volt
  HD2-DM-B Basic Diagnostic Module
Redundant Fieldbus High Density Power Hub Motherboard >>Additional Info: P+F Application
  MBHD-FB-4R* 4 Segment (For new installations - refer to MBHD-FB1-4R)
  MBHD-FB1-4R* 4 Segment
High Density Power Hub Modules
  HD2-FBPS.1.25.360 Power Supply, 25-27 Volt
  HD2-FBPS.1.500 Power Supply, 28-30 Volt
  HD2-DM-B Basic Diagnostic Module
Redundant Fieldbus Compact Power Hub Motherboard >>Additional Info: P+F Application
  MBHC-FB-8R* 8 Segment
Compact Power Hub Modules
  HCD2-FBPS-1.500 Power Supply, 28-30 Volt
  HCD2-FBPS-1.23.500 Power Supply, 21-23 Volt
  HD2-DM-B Basic Diagnostic Module
KLD2-STR-1.24.400.IEC ( STR400) (FieldConnex Branded) Fieldbus Power Supply (Manufactured March, 2004 or later)
KLD2-FBPS-1.25.360 Fieldbus Power Supply, 25-27 Volt


R. STAHL Schaltgeraete GmbH
Safe Area, Zone 2 or Class I, Div 2
  9412/PS-I Redundant Fieldbus Power Supply with terminator (For new installations - refer to 9412/00 series)
  9412/PS-2 Redundant Fieldbus Power Supply without terminator (For new installations - refer to 9412/00 series)
  9412/PS-DT Dual (2 segment) Fieldbus Power Supply with terminator (For new installations - refer to 9412/00 series)
  9412/PS-D Dual (2 segment) Fieldbus Power Supply without terminator (For new installations - refer to 9412/00 series)
  9419/04R - xx1-02C1 Redundant Fieldbus Power Supply Carrier - 4 Segments
  9419/08R - xx1-02C1 Redundant Fieldbus Power Supply Carrier - 8 Segments
  9419/08F - xx1-01C1 Simplex Fieldbus Power Supply Carrier - 8 Segments
  9412/00-310-11s Fieldbus Power Supply Module 28 Volts with Advanced Diagnostics
  9412/00-320-11s Fieldbus Power Supply Module 28 Volts with Advanced Diagnostics - User Settable Warning Levels
  9412/01-310-11s Fieldbus Power Supply Module 15 Volts with Advanced Diagnostics
  9412/01-320-11s Fieldbus Power Supply Module 15 Volts with Advanced Diagnostics - User Settable Warning Levels
  9412/02-310-11s Fieldbus Power Supply Module 21 Volts with Advanced Diagnostics
  9412/02-320-11s Fieldbus Power Supply Module 21 Volts with Advanced Diagnostics - User Settable Warning Levels


Phoenix Contact
  FB-PS-25/0.36A Fieldbus Power Supply


MooreHawke
Routemaster Series 100 With RM114/118 Device Couplers          Fieldbus IS Power Supply
See Knowledge Base Article #NA-0300-0050


MTL Instruments
MTL5995 Fieldbus Power Supply -- Use MTL5995-PS for New Installations
MTL5995-PS Fieldbus Power Supply
9121-IS-PS Fieldbus FISCO IS Power Supply >>Additional Info: Application MTL IS
9122-IS-PS Fieldbus FISCO IS Power Supply >>Additional Info: Application MTL IS
9111-NI-PS Fieldbus FNICO NI Power Supply >>Additional Info: Application MTL NI
9112-NI-PS Fieldbus FNICO NI Power Supply >>Additional Info: Application MTL NI
9109-22 Redundant 4 Segment FISCO Power Supply System - Panel Mount (Includes 9109-CA-PS carrier with 9122-IS-CM power modules, 9129-IS supply arbitration modules, and 9126-PU host power modules)
F690A-** 4 Segment Redundant Fieldbus Power Supply with FPS-IPM Power Supplies & FPS-ALM Alarm Module

back to top

Fieldbus Termination Blocks, Barriers, & Miscellaneous

MTL-Relcom
Megablock With and Without SpurGuards™ (Short Circuit Protection) >>Additional Info: Relcom Application
Safe Area, Class I Division 2 (Zone 2), or Class I Division 1 (Zone 0,1)
  FCS-MB* 2, 4, 8, 10, 12 Device Megablock
  FCS-MB*-T 2, 4, 8, 10, 12 Device Megablock with Fixed Terminator
Safe Area, Class I Division 2 and Zone 2 including Energy Limited Spurs
  FCS-MB*-SG 2, 4, 8, 10, 12 Device Megablock with SpurGuards™
  FCS-MB*-SG-T 2, 4, 8, 10, 12 Device Megablock with SpurGuards™ and Fixed Terminator
  F203, F207, F211, F118, F215 4, 8, 10, 12 Device Megablock with SpurGuards™ and Switchable Terminator
Class I Division 1 and Zone 0,1 - Intrinsically Safe / FISCO
  FCS-MB* 2, 4, 8, 10, 12 Device Megablock
  FCS-MB*-T 2, 4, 8, 10, 12 Device Megablock with Fixed Terminator
  F204, F208, F212, F216 4, 8, 10, 12 Device Megablock with Switchable Terminator
  F240, F244, F250, F256, F268 2, 4, 8, 10, 12 Device IS Megablock
  F242, F246, F252, F258, F270 2, 4, 8, 10, 12 Device IS Megablock with Fixed Terminator
  F248, F254, F260, F272 4, 8, 10, 12 Device IS Megablock with Switchable Terminator
  F241, F245, F251, F257, F269 2, 4, 8, 10, 12 Device IS Megablock with SpurGuards™
  F243, F247, F253, F259, F271 2, 4, 8, 10, 12 Device IS Megablock with SpurGuards™ and Fixed Terminator
  F249, F255, F261, F273 4, 8, 10, 12 Device IS Megablock with SpurGuards™ and Switchable Terminator
Zone 1 - Increased Safety
  F240-XE, F244-XE, F250-XE, F256-XE, F268-XE 2, 4, 8, 10, 12 Device IS Megablock
  F242-XE, F246-XE, F252-XE, F258-XE, F270-XE 2, 4, 8, 10, 12 Device IS Megablock with Fixed Terminator
  F248-XE, F254-XE, F260-XE, F272-XE 4, 8, 10, 12 Device IS Megablock with Switchable Terminator
  F241-XE, F245-XE, F251-XE, F257-XE, F269-XE 2, 4, 8, 10, 12 Device IS Megablock with SpurGuards™
  F243-XE, F247-XE, F253-XE, F259-XE, F271-XE 2, 4, 8, 10, 12 Device IS Megablock with SpurGuards™ and Fixed Terminator
  F249-XE, F255-XE, F261-XE, F273-XE 4, 8, 10, 12 Device IS Megablock with SpurGuards™ and Switchable Terminator


Turck/InterlinkBT
JBBS-49-E413,613,813 Eurofast 4,6,8 Device Junction Block (Without Short Circuit Protection)
JBBS-49-M413,613,813 Minifast 4,6,8 Device Junction Block (Without Short Circuit Protection)
JBBS-49SC-E413 - U8206-43
JBBS-49SC-E613 - U8206
JBBS-49SC-E813 - U8206-83		 Eurofast 4,6,8 Device Junction Block With Device Short Circuit Protection
(Manufactured November, 2004 (4404U) or later
JBBS-49SC-M413 - U8607
JBBS-49SC-M613 - U7908
JBBS-49SC-M813 - U7909		 Minifast 4,6,8 Device Junction Block With Device Short Circuit Protection
(Manufactured November, 2004 (4404U) or later
JRBS-49SC-*R 4,6,8,10,&12 Port Device Coupler with Device Short Circuit Protection, DIN Rail Mount


Pepperl+Fuchs
Segment Protectors for Zone 2/Class I, Div. 2 applications: >>Additional Info: P+F Application, and P+F NI Application
F2-JBSC-*.FF.* 4,6,8 Spur with connectors and Device Short Circuit Protection
  F2-JBSC-* 4,6,8 Spur with cable glands and Device Short Circuit Protection
  F6-JBSC-*.FF.* 4,6,8 Spur, Stainless Steel housing with connectors and Device Short Circuit Protection
  F6-JBSC-* 4,6,8 Spur, Stainless Steel housing with cable glands and Device Short Circuit Protection
  R-JBSC-* 4,6,8 Spur, DIN-Rail mounting with Device Short Circuit Protection
  (Trunk and Spur Shields (T-S) must be jumpered together and isolated (remove jumpers) from case ground)
  R-SP-N12 12 Spur, DIN-Rail mounting with Device Short Circuit Protection
  R2-SP-N* 4,6,8,10,12 Spur, DIN-Rail mounting with Device Short Circuit Protection
  Modular Segment Protector
  RM-SPTM-N2 Trunk Module with 2 Spurs with Short Circuit Protection
  RM-SPEM-N4 Expansion Module 4 Spur with Short Circuit Protection
Segment Protectors for Zone 1/Class I, Div. 2 applications:
  R-SP-E12 12 Spur, DIN-Rail mounting with Device Short Circuit Protection
FieldConnex FISCO/Entity IS FieldBarriers: >>Additional Info: P+F Application
  F2D0-FB-Ex4* 4 device Barrier with short circuit protection
(Manufactured June, 2003 or later)
  F6D0-FB-Ex4* 4 device Barrier with Stainless Steel housing and Short Circuit Protection
(Manufactured June, 2003 or later)
  RD0-FB-Ex4* 4 device Barrier with DIN-Rail mounting and Short Circuit Protection
(Manufactured June, 2003 or later)
  The Field Barrier is Application Dependent – The segment must be powered by either a Relcom or Pepperl+Fuchs Fieldbus Power Supply listed above, or an approved Power Conditioner such as a Pepperl+Fuchs HD2-FBCL.1.500 Power Conditioner module or the KLD2-PC- 1.1.IEC Power Conditioner . See Knowledge Base Article # NA-0300-0048


R. STAHL Schaltgeraete GmbH
Fieldbus Barriers Ex e/Ex i for Zone 1, 2 or Class I, Div 2 installation, for Ex i/IS field devices:
  9411/21-2*0-*1 4,8 spur barrier with short circuit protection, DIN-rail mount
  9411/21-2*1-*1 4,8 spur barrier with short circuit protection, polyester enclosure
  9411/21-2*2-*1 4,8 spur barrier with short circuit protection, stainless steel enclosure
  The Field Device Barrier is Application Dependent – The segment must be powered by an approved R. Stahl, Relcom, or Pepperl+Fuchs Fieldbus Power Supply. See Knowledge Base Article # AP-0600-0132
Fieldbus Barriers Ex e/Ex i for Zone 2 or Class I, Div 2 installation, for Ex i/IS field devices:
  9411/24-3*0-*1 4,8 spur barrier with short circuit protection, DIN-rail mount
  9411/24-3*1-*1 4,8 spur barrier with short circuit protection, polyester enclosure
  9411/24-3*2-*1 4,8 spur barrier with short circuit protection, stainless steel enclosure
  The Field Device Barrier is Application Dependent - The segment must be powered by an approved R. Stahl, Relcom, or Pepperl+Fuchs Fieldbus Power Supply. See Knowledge Base Article # AP-0600-0132
Fieldbus Device Couplers Ex e/Ex e for Zone 1, 2 or Class I, Div 2 installation, for Ex ed/non-IS field devices:
  9411/11-2*0-*0 4,8 spur coupler with short circuit protection, DIN-rail mount
  9411/11-2*1-*0 4,8 spur coupler with short circuit protection, polyester enclosure
  9411/11-2*2-*0 4,8 spur coupler with short circuit protection, stainless steel enclosure
  The Fieldbus Device Coupler must be installed with both trunk and spur shields connected to coupler ground bar as illustrated by Option1 in Knowledge Base Article # AP-0600-0132.
Fieldbus Device Couplers non-Ex
  9411/00-010-*0 4,8 spur coupler with short circuit protection, DIN-rail mount
  The Fieldbus Device Coupler must be installed with both trunk and spur shields connected to coupler ground bar as illustrated by Option1 in Knowledge Base Article # AP-0600-0132.


MTL Instruments
Fieldbus Barriers Ex e trunk/Ex i spurs for Zone 1, 2 or Class I, Div 2 installation, for Ex i/IS field devices:
  9311-FB-* 4 spur barrier with short circuit protection, DIN-rail mount (For new installations - refer to 9370 series)
  9311-FB-*PP 4 spur barrier with short circuit protection, polyester enclosure (For new installations - refer to 9370 series)
  9311-FB-*SS 4 spur barrier with short circuit protection, stainless steel enclosure (For new installations - refer to 9370 series)
  Modular Fieldbus Barriers and Components
  9371-FB-*-* 6 spur barrier with short circuit protection with enclosure
  9374-FB-*-* 6 spur barrier (expandable to12 spurs), with short circuit protection with enclosure
  9373-FB-*-* 12 spur barrier with short circuit protection with enclosure
  9377-FB Fieldbus Isolated Coupler Pluggable Module 6 spur
  9378-FT Fieldbus Terminator
  9376-SP Trunk Surge Protector See Application Note TAN1010
  The Fieldbus barrier is Application Dependent - The segment must be powered by an approved MTL- Relcom, R. Stahl, or Pepperl+Fuchs Fieldbus Power Supply. See Knowledge Base Article # AP-0600-0142
9321-SC Fieldbus IS Entity Spur Adapter (9121-IS Use Only) See Application MTL IS
9322-SC Fieldbus IS EExia Spur Adapter See Application MTL IS
9323-SC Fieldbus IS Entity Spur Adapter (9121/22-IS Use Only) See Application MTL IS
FP32 Fieldbus Surge Protector (Rail Mount) See Application Note TAN1010
FS32 Fieldbus Surge Protector (Plug In) See Application Note TAN1010
TP32* Fieldbus Surge Protector (Threaded) See Application Note TAN1010
TP32*-NDI Fieldbus IS Surge Protector (Threaded) See Application Note TAN1010


Phoenix Contact
Fieldbus Device Coupler Zone 2, Class I, Div 2, or Safe Area, FNICO, FISCO ic
  FB -*ET Modular Trunk Interface with Terminator
  FB -*SP Modular 2,4 Spur Expansion with Short Circuit Protection
  The shield connection switch on the FB-ET Trunk Interface must be in either the default and preferred position 1 (no connect) or alternate position 2 (capacitive coupled). Position 3 (grounded) is NOT supported by Emerson


Smar
RP302     Fieldbus Repeater

back to top

Fieldbus Terminators

MTL Instruments
FBT1 Fieldbus Terminator
FBT1-IS Fieldbus IS Terminator


Relcom, Inc
F100 Fieldbus Terminator with Surge Protection
FCS-MBT Fieldbus IS Terminator with Surge Protection
FCS-MBT-XE Fieldbus Increased Safety Terminator with Surge Protection


Pepperl+Fuchs
F*-FT-Ex1.D.IEC Fieldbus Terminator (Threaded)
F*-FT-Ex1.I.IEC Fieldbus IS Terminator (Threaded)


R. STAHL Schaltgeraete GmbH
Fieldbus Terminators for Zone 1, 2 installation
9418/01-201-10 Fieldbus Terminator - Ex e (with leads)
9418/02-201-10 Fieldbus IS Terminator - Ex i (with leads)


Turck/InterlinkBT
RSEV 49 TR Eurofast Fieldbus Terminator
RSV 49 TR Minifast Fieldbus Terminator
JRBS-49TR Fieldbus Terminator - two pin (For use with JRBS-49SC-*R Coupler)

back to top