• One package for fiscal metering or gas quality
• Custody transfer analysis from C6+ to C9+ (with HCDP)
• Contaminant monitoring – trace hydrogen sulfide, carbon dioxide, oxygen, etc.
• Combine measurements and reduce analysis cost
• Oxygen (0-2%)
• Trace hydrogen sulfide (0-20 ppm)
• Carbon dioxide (as fast as 90 seconds)
• Helium/hydrogen (0-10%)
• Hydrocarbon dew point (with cricondentherm)

Reduced installation costs

• Standard 24 VDC power
• Integrated controller electronics
• Pipe-mount, wall-mount, or floor-mount

Lower operation and maintenance costs

• No shelter or instrument air required
• Low carrier and power consumption
• Longest gas chromatograph valve and column warranties available

Unmatched measurement performance

• High repeatability — ±0.01% of heating value (±0.1 BTU/1000 BTU) for controlled-environment C6+ analysis and ±0.015 (±0.15 BTU/1000 BTU) of heating value for uncontrolled-environment (-20° to 60° C / -4° to 140° F) C6+ analysis
• Wide dynamic range from percent to trace level components
• Reliable performance over broad ambient temperatures -40° C to 60° C / -40° F to 140° F

Easy to use

• MON 20/20™ software setup and diagnostics
• A redesigned architecture with fewer cables and easy accessibility to internal parts

Power:

• Standard: 24 VDC (20-30 VDC)
• Optional: 90-264 VAC, 47-63 Hz

Environmental temperature:

• -20° to 60° C (-4° to 140° F)

Environmental temperature without safety certification:

• -40° to 60° C (-40° to 140° F)

Enclosure Protection Rating: IP66 and NEMA 4X

Dimensions (without sample system):

• Wall-mount:
  711.20 mm H x 444.5 mm W x 497.84 mm D
  (28” H x 17.5” W x 19.6” D)
• Pipe-mount:
  711.20 mm H x 444.5 mm W x 670.56 mm D
  (28” H x 17.5” W x 26.4” D)
• Floor-mount:
  1531.62 mm H x 444.5 mm W x 612.14 mm D (60.3” H x 17.5” W x 24.1” D)

Mounting: Free-standing (standard), wall- or pipe-mount (optional)

Approximate Weight (without sample system): 49.895 kg (110 lbs.)

Area Safety Certification Options:*

• CSA:
• USA
• Class I, Zone 1, A Ex d IIC, T6
• Class I, Division 1, Groups B, C, D, T6,  Enclosure Type 4
• Canada
• Class I, Zone 1, Ex d IIC, T6
• Class I, Zone 1, Ex d IIC, T6
• ATEX/IECEX
   – Ex II 2G Ex d IIC T6 Tamb = 60° C

Oven: Airless heat sink, maximum 150° C (302° F)

Valves: 6-port and 10-port diaphragm chromatograph valves. Other types of valves, such as liquid injection or rotary valves, may be used depending on the application

Carrier Gas: Application-dependent. Typically zero-grade helium, nitrogen, or hydrogen

Sample Input Pressure Range (recommended): 15-20 psig

Carrier Gas Input Pressure Range (recommended): 90-100 psig

Detector: Thermal conductivity detector (TCD), flame ionization detector (FID), TCD/TCD or TCD/FID dual detector configurations possible; flame photometric detector (FPD) available (see FPD module data sheet)

Gating Options: Fixed-time or automatic, slope-sense gating of peaks

Streams: Up to 18 streams (including calibration stream), 6 streams standard
Chromatograms stored/archived internally: Stores up to 30 days of analysis data and a minimum of two days of chromatograms

Communications (Standard):

Ethernet:  Two available connections – one RJ-45 port & one 4-wire termination – with 10/100mbps

Analog inputs: Two standard inputs filtered with transient protection, 4-20mA (user scalable and assignable)

Analog outputs: Six isolated outputs, 4-20mA
Digital inputs: Five inputs, user assignable, optically isolated, rated to 30VDC @ 0.5A

Digital outputs: Five user-assignable outputs, Form C and electro-mechanically isolated, 24VDC

Serial: Three termination blocks, configurable as RS-232, RS-422 or RS-485 and one D-sub (9-pin) port for PC connection

Communications (Options):
Two expansion slots available for additional communications.  Each slot has the capacity to add one of the following:
4 analog inputs (isolated) card
4 analog outputs (isolated) card
8 digital inputs (isolated) card
5 digital outputs (isolated) card
1 RS-232, RS-422 or RS-485 serial connection card
1 modem card, 300-19.2k baud

Memory Capacity: 128 Mb of flash memory for data storage; 64 Mb of SDRAM system memory with 2 Mb static RAM (battery-backed)

Internal Modem (optional): 14.4K bps with V.42 bis. Providing up to 57.6K bps throughput.

Ethernet: 10/100 mbps with RJ-45 port

*Use of the optional LSIV will result in slightly different certifications.