Model 400 ENDURANCE™ Conductivity Sensors
- SCREW-IN process connection
- RUGGED CONSTRUCTION: titanium electrodes with 316 stainless steel fitting and PEEK insulator.
- INITIAL CALIBRATION NOT REQUIRED. Pre-determined cell constant ensures out-of-the-box accuracy.
- CELL CONSTANTS 0.01, 0.10, AND 1.0/cm cover broad range of conductivity
- HIGH TEMPERATURE (392o200oC)) option available
- AVAILABLE WITH VARIOPOL (VP) quick disconnect fitting.
|
The Model 400 and 400VP sensors are intended for the determination of conductivity in applications ranging from high purity water to clean cooling water. The sensors are ideal for use in clean, non-corrosive samples having conductivity less than 20,000 uS/cm. For dirty or corrosive samples or for samples having high conductivity, a toroidal (inductive) sensor such as the Model 228 or 226 is recommended.
Both low temperature (221°F (105°C)) and high temperature options (392°F (200°C)) are available. The pressure limit is 250 psig (1825 kPa abs). The sensor is available with integral cable (Model 400) or with quick disconnect Variopol cable (Model 400VP).
The sensors are intended for direct insertion in the process piping using a ¾ MNPT fitting. They can also be used in a sidestream sample. Cell constants are 0.01/cm, 0.10/cm, and 1.0/cm. |
|
|
