Use SNAP-ON applications with AMS Device Manager to gain advanced diagnostic functionality for specialized applications.
AlertTrack
The AlertTrack SNAP-ON application gives you visibility to the health of your field devices and documentation of parameter changes. The AlertTrack SNAP-ON application helps you to identify the root cause of a problem so you can correct the issue before the equipment is damaged.
Through the AlertCast feature, you can receive alerts instantly on your mobile devices. Determine where, when, and to whom these alerts are sent and route alerts by severity, plant area, or time stamp.
AMS ValveLink
AMS ValveLink monitors the health of the valve assembly and provides customized diagnostics for advanced troubleshooting. You can detect problems with air leakage, valve assembly friction and deadband, instrument air quality, loose connections, supply pressure restriction, and valve assembly calibration.
When a problem is identified, AMS ValveLink provides a description of the problem and severity indicator, a probable cause, and a recommended action.
AMS Wireless
The AMS Wireless SNAP-ON application gives you more power to manage your wireless networks. You can design and validate your network based on best practices. Once your wireless network is installed, you can graphically view communications paths to easily identify any potential trouble spots.
Access key diagnostic and performance parameters by scrolling over a device and launching directly into AMS Device Manager for additional device details.
Calibration Assistant
The Calibration Assistant SNAP-ON application interfaces with documenting calibrators to manage the calibrations of HART, FOUNDATION fieldbus, wireless, and conventional devices. It allows you to easily group your devices into test schemes and calibration routes for maximum efficiency.
You can access the calibration history of devices and generate calibration certificates and reports. The Calibration Assistant SNAP-ON application gives you more accurate calibration data by reducing reporting errors and extending the time between calibrations.
MV Engineering Assistant
The MV Engineering Assistant SNAP-ON application provides faster setup, reduced chances of improperly-configured flow transmitters, and accurate device measurements for HART and FOUNDATION fieldbus Rosemount multivariable transmitters, Mass ProBar, and Mass ProPlate flowmeters.
Meter Verification
The Meter Verification SNAP-ON application gives you the ability to verify and document the performance and overall health of your Micro Motion Coriolis mass flowmeters from the comfort of your control room.
Check and capture device configuration and zero calibration level, as well as sensor structure, electronics, and signal processing for a complete verification of meter performance.
QuickCheck
The QuickCheck SNAP-ON application lets you fix the output of multiple devices for system interlock checking. The QuickCheck SNAP-ON application makes it fast and easy to check multiple devices at one time. You can also save the steps to easily run them again in the future. Reports are available to ensure all devices are returned to a ready state.
Third Party SNAP-ON Applications
Emerson also intergrates third party applications. AMS Device Manager supports Emerson's commitment to openness and intergration of your plant assets. Supported applications include:
- Masoneilan's ValVue
- Smar's Valid
- Flowserve's ValveAnalysis
